DC Sports Exhaust Polished DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust Burnt DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)
DC Sports Exhaust DC Sports Y Back Exhaust (03-08 Nissan 350Z)

DC Sports Y Back Exhaust Tip (03-08 Nissan 350Z)

SCS4201

Finish
  • In stock, ready to ship
  • Inventory on the way
Regular price$799.99
/
Shipping calculated at checkout.

About This Item

  • Increased exhaust flow allows for improved performance
  • Provides a much more aggressive exhaust note over OEM system
  • Enhances vehicle aesthetics
  • Quick and easy bolt-on installation
  • 3" 16 gauge Piping (76mm)
  • 4.5" tip (114 mm)
  • Increased exhaust flow allows for improved performance
  • Provides a much more aggressive exhaust note over OEM system
  • Enhances vehicle aesthetics

Install Guide

View Install Guide HERE   1. Locate a flat surface and place the car on jack stands. 
2. Locate and remove two (2) OEM nuts holding the exhaust to the OEM Y pipe. 
 3. Locate and remove two (2) nuts holding the exhaust pipe together. Be careful with the ground cable. 
4. Lubricate all exhaust hangers and carefully dislodge exhaust system from hangers. ***we recommend using an exhaust hanger removal tool*** 
5. Install gasket and primary pipe and tighten bolts. Slide the exhaust clamp onto the end of the pipe. 
6. Install secondary pipe. Make sure slip fit sits properly, set exhaust tip at desired location and tighten exhaust clamp. 
7. Install OEM rubber hangers on to muffler sections. 
8. Place the ground cable onto the exhaust clamp and use provided nut to tighten it down. 
9. If needed loosen clamps and readjust tip until desired location is reached. 
10. USING HOT SOAP AND WATER THOROUGHLY CLEAN ENTIRE EXHUAST SYTEM TO CLEAR IT OF ANY HANDPRINTS, OIL, & DEBRIS. DC Sports will not warranty finish of piping due to lack of proper clean up before starting up. 
11. ***NOTE: AFTER 50 MILES OF DRIVING PLEASE RETIGHTNE ALL CLAMPS AND HARDWARE***   

Recently viewed