DC Sports Intake System DC Sports Short Ram Intake (17-21 Kia Stinger 2.0L / 18-21 Genesis G70 2.0L)
DC Sports Intake System DC Sports Short Ram Intake (17-21 Kia Stinger 2.0L / 18-21 Genesis G70 2.0L)
DC Sports Intake System DC Sports Short Ram Intake (17-21 Kia Stinger 2.0L / 18-21 Genesis G70 2.0L)
DC Sports Intake System DC Sports Short Ram Intake (17-21 Kia Stinger 2.0L / 18-21 Genesis G70 2.0L)
DC Sports Intake System DC Sports Short Ram Intake (17-21 Kia Stinger 2.0L / 18-21 Genesis G70 2.0L)
DC Sports Intake System DC Sports Short Ram Intake (17-21 Kia Stinger 2.0L / 18-21 Genesis G70 2.0L)
DC Sports Intake System DC Sports Short Ram Intake (17-21 Kia Stinger 2.0L / 18-21 Genesis G70 2.0L)
DC Sports Intake System DC Sports Short Ram Intake (17-21 Kia Stinger 2.0L / 18-21 Genesis G70 2.0L)

DC Sports Short Ram Intake (17-21 Kia Stinger 2.0L / 18-21 Genesis G70 2.0L)

SRI2000

  • In stock, ready to ship
  • Inventory on the way
Regular price$287.89
/
Shipping calculated at checkout.

About This Item

  • Increases performance
  • Improves throttle response
  • Lightweight Aluminum Tubing
  • Washable and Reusable High Flow, Performance Air Filter Included
  • Multi-Ply Hight Temp Silcon Couplers Included
  • Quick and easy installation
  • Heat Shield Included
  • Increases performance
  • Improves throttle response
  • Lightweight Aluminum Tubing

Install Guide

View Install Guide HERE   1. Disconnect battery terminals 
2. Remove two (2) 12 mm bolts holding strut bar 
3. Remove the three (3) hoses going into the intake tube 
4. Loosen clamps that goes from the rubber intake tube to the intake box and the throttle body and gently pull it out. 
5. Remove the three (3) 10 mm screws holding the intake box to the car and pull intake box off car. 
6. Locate the two (2) 10mm bolts securing the air duct and remove air duct from car. 
7. Install rubber on heat shield. The thin rubber goes on the bottom of the heat shield while the thick one goes on the top 
 8. Install heat shield on vehicle. Use two (2) 10 mm screws that you previously removed for this install. 
9. Assemble the intake tube by installing the filter kit and the coupler. Use clamps to secure everything 
10. Install intake onto car. Tighten down clamp from coupler to throttle body 
11. Install the three (3) hoses onto the intake tube. Use the O.E. clamps 
12. Install the strut bar back. 
13. Double check your work! Make sure that you have no interference issue, clamps and hardware are tight.  

Recently viewed