DC Sports Exhaust Polished DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust Burnt DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust DC Sports Catback Single Canister Exhaust (18-22 CAMRY)
DC Sports Exhaust DC Sports Catback Single Canister Exhaust (18-22 CAMRY)

DC Sports Catback Single Canister Exhaust (18-22 CAMRY)

SCS4608

Finish
  • Low stock - 5 items left
  • Inventory on the way
Regular price$774.99
/
Shipping calculated at checkout.

About This Item

  • Increased exhaust flow allows for improved performance
  • Provides a much more aggressive exhaust note over OEM system
  • Enhances vehicle aesthetics
  • Quick and easy bolt-on installation
  • 2.5" 16 gauge Piping (63.5mm)
  • 3.5" tips
  • FITS SE (4cyl) (excludes V6 and AWD models)
  • Increased exhaust flow allows for improved performance
  • Provides a much more aggressive exhaust note over OEM system
  • Quick and easy bolt-on installation

Install Guide

View Install Guide HERE 1. Utilizing a flat work area (preferably on concrete), jack up the car and support the car on jack stands under the frame support points. (Refer to your owner’s manual) DO NOT USE THE JACK TO SUPPORT THE CAR WHILE WORKING UNDERNEATH! 
2. Remove the bolts holding the exhaust pipe to the Catalytic Converter pipe and the bolts holding the exhaust pipe to the Muffler pipe. 
3. Using an exhaust hanger removal tool remove the rubber hanger holding the exhaust pipe to the car. 
4. Use the exhaust hanger removal tool to remove the 2 rubber hangers holding the Muffler pipe to the car. 
5. Install DC Sports pipe onto Catalytic Converter pipe. Make sure to use provided gasket. Tighten the bolts. Slide exhaust clamp on the end of the pipe. 
6. Install the second pipe by slipping it into the first pipe. Install rubber hanger from car onto the exhaust hanger. Slide the exhaust clamp onto the end of the pipe. 
7. Install muffler piece onto car by inserting rubber hanger onto car’s hanger and making sure the exhaust pipe slips into the secondary pipe. 8. Make sure exhaust pipes do not rub on anything and exhaust tips line up properly. Tighten down exhaust clamp. 
9. RECHECK ALL YOUR WORK. If exhaust system looks off loosen clamps and adjust. Tighten clamps back down afterward. 
10. Lower the car off the jack stands and start the engine and check for exhaust leaks. 
11. After approximately 500 miles (800km) re-check the exhaust system bolts and nuts and tighten as necessary.  

Recently viewed